1. Enterprise Network Switch Modules Parts
  2. sku: 2365842925884651
  3. FINISAR FTLF8532P4BCV-EM

FINISAR FTLF8532P4BCV-EM Fiber Channel Sr Sfp Transceiver 32GB 850NM

Ftlf8532p4bcv-em Finisar 850nm 32gb Fiber Channel Sr Sfp Transceiver

( Brand: Finisar ), ( Manufacturer Part Number: FTLF8532P4BCV-EM ), ( Part Type: Transceiver ), ( Network Ports: Sfp )

Review FINISAR 850nm Fiber Channel Sr Sfp Transceiver

The Finisar FTLF8532P4BCV-EM 850nm 32GB Fiber Channel SR SFP Transceiver is a high-performance optical module designed foruse in storage area networks (SANs) and other fiber optic communication applications. This transceiver is part of Finisar's Extreme Density (ED) Fiber Channel product family, which is known for its compact size and high density.

The 850nm wavelength of this transceiver is ideal for use in long-wavelength fiber optic networks. The 32GB data transfer rate is achieved using the Serial Attached SCSI (SAS) interface, which is a high-speed interface for connecting hosts and arrays in data centers and other IT environments. The Fiber Channel protocol is widely used in SANs for its reliability, fast data transfer rates, and support for large data blocks.

This transceiver is an Small Form-factor Pluggable (SFP) module, which means it measures only 3.37 inches (8.56 cm) in length and can be hot-pluggable in supported vendors' equipment. The transceiver comes with a LC-LC dual-plug LC connector on the fiber optic side, making it compatible with standard LC fiber cabling. The use of SFP modules allows for reduced power consumption compared to traditional full-size transceivers, as well as greater hardware flexibility and ease of installation.

The Finisar FTLF8532P4BCV-EM 850nm 32GB Fiber Channel SR SFP Transceiver is designed for use in short-range point-to-point applications, such as in a fiber optic backbone, and has a signal reach of up to 10 kilometers (6.2 miles). It supports both bi-directional and multi-mode fiber cables, making it a versatile solution for a wide range of applications. The transceiver also comes with a built-in power management system, which ensures reliable operation and reduces the need for external power supplies.

The Finisar FTLF8532P4BCV-EM 850nm 32GB Fiber Channel SR SFP Transceiver undergoes rigorous testing and meets the Fibre Channel Industry Association (FCIA) interoperability standards. This certification ensures compatibility with a wide range of Fiber Channel equipment from various vendors. The transceiver also comes with a three-year warranty and is RoHS and WEEE compliant, making it an environmentally responsible choice for your networking needs.

In summary, the Finisar FTLF8532P4BCV-EM 850nm 32GB Fiber Channel SR SFP Transceiver is a compact, high-performance, and interoperable solution for 32GB Fiber Channel communication applications. Its long-wavelength technology and SFP form factor make it suitable for use in short-range point-to-point applications, while its high data transfer rate and compatibility with various fiber cabling make it a versatile choice for your networking infrastructure. The transceiver's built-in power management system, FCIA certification, and three-year warranty provide reliable and worry-free operation, making it a smart investment for your organization's IT infrastructure.

Pros and Cons of Buying Finisar FTLF8532P4BCV-EM 850nm 32GB Fiber Channel SR SFP Transceiver

The Finisar FTLF8532P4BCV-EM 850nm 32GB Fiber Channel SR SFP Transceiver is a high-speed data transfer solution designed for enterprise-level storage area networks (SANs). This transceiver uses Small Form-factor Pluggable (SFP) technology and supports 850nm wavelength for duplex fiber connectivity. Here are the pros and cons of buying this product:

Pros:

1. High-speed data transfer: This transceiver supports 32GBps data transfer rate, enabling fast data transfer between servers and storage devices in a SAN environment.

2. Compatibility: This transceiver is compatible with most Fiber Channel switches and host bus adapters that support 32GB Fiber Channel and SFP transceivers.

3. Reliability: Finisar is a well-known manufacturer of optical transceivers and is known for its high-quality products. This transceiver offers reliable data transfer and low power consumption.

4. Multi-mode fiber support: This transceiver supports multi-mode fiber, which is cost-effective and easier to install over long distances compared to single-mode fiber.

5. RoHS and WEEE compliant: The transceiver is RoHS (Restriction of Hazardous Substances) and WEEE (Waste Electrical and Electronic Equipment) compliant, making it an environmentally friendly option.

Cons:

1. Cost: 32GB Fiber Channel transceivers are still relatively new and can be more expensive than their 10GB or 40GB counterparts.

2. Power consumption: Although the transceiver consumes less power compared to older generation transceivers, it may still consume more power than lower-speed transceivers due to the high-speed data transfer rate.

3. Complexity: Implementing a 32GB Fiber Channel SAN environment can be more complex than implementing a 10GB or 40GB SAN due to the higher data transfer rate and the need for compatible hardware and cabling.

Conclusion:

The Finisar FTLF8532P4BCV-EM 850nm 32GB Fiber Channel SR SFP Transceiver offers high-speed data transfer, compatibility, reliability, and multi-mode fiber support. However, it can be more expensive than lower-speed transceivers, and implementing a 32GB Fiber Channel SAN environment may be more complex. For organizations that require fast data transfer speeds and are upgrading their existing SAN infrastructure, this transceiver could be a good investment.

Recommendation:

If your organization requires a high-speed data transfer solution for a flexible and scalable SAN infrastructure, and you're upgrading from a lower-speed Fiber Channel system, then the Finisar FTLF8532P4BCV-EM 850nm 32GB Fiber Channel SR SFP Transceiver is a recommended option. However, if your organization doesn't require a high-speed solution or is on a tight budget, you may want to consider lower-speed options.

Details:

part #: ftlf8532p4bcv prices

  • $10.88-$118.88

specifications switchchunk:

  • brand: Finisar
  • mpn: Ftlf8532p4bcv-em
  • part type: Transceiver
  • network ports: Sfp

shipping switchchunk:

  • transit: 4-6 Days
  • cost: $0.00
  • service: Standard
  • class: Standard
  • type: Fixed

general switchchunk:

  • condition: Used
  • Enterprise Networking, Servers > Switches Hubs > Switch Modules

payments switchchunk:

  • wallet: Apple-pay
  • other
  • credit card: Mastercard

seller switchchunk:

  • # reviews: 16164
  • rating: 99.7%
  • city: Marlin, Texas

offer switchchunk:

  • availability: In Stock
  • best offers: True
  • options: Ship-to-home
  • sold: 0
  • started: November 1, 2024
  • quantity: 3

returns switchchunk:

  • policy: Returns Accepted
  • time: 30 Days
  • paid by: Seller
  • method: Money back
part type: transceiver, network ports: sfp,
category: computers > enterprise networking, servers > switches hubs > switch modules, sku: 2365842925884651,

Finisar FTLF8532P4BCV Is Similar To:

switchchunk logo
5 offers $10.88–$118.88 USD
  • Offer #1: $97.88 price + $29.38 shipping estimate = $127.26* total.+$29.38 shipping
  • Offer #2: $118.88 price + $0.00 shipping estimate = $118.88* total. Wavelength: 850nm Oxide VCSEL laser transmitter. Module Type: SFP28 Optical Transceiver.FREE SHIPPING
  • Offer #3: $10.88 price + $23.77 shipping estimate = $34.65* total.+$23.77 shipping
  • Offer #4: $49.99 price + $0.00 shipping estimate = $49.99* total. Finisar 32GB SFP+ 850nm SC Transceivers.FREE SHIPPING
  • Offer #5: $69.00 price + $0.00 shipping estimate = $69.00* total.FREE SHIPPING

Copyright © switchchunk.com