1. Enterprise Network Switch Modules Parts
  2. sku: 2430557580712563
  3. FINISAR FTLF8519P2BCL

FINISAR FTLF8519P2BCL Sfp Gbic Transceivers 1000BASE-SX 850NM

Ftlf8519p2bcl Finisar Lot Of 4 1000base-sx 850nm Sfp Gbic Transceivers

( Brand: Finisar ), ( Manufacturer Part Number: FTLF8519P2BCL ), ( Type: Sfp )

Review FINISAR Lot Of 1000base-sx 850nm Sfp Gbic Transceivers

The Finisar FTLF8519P2BCL 1000Base-SX 850nm SFP GBIC Transceivers are high-performance, fiber optic data transmission modules designed for use in Gigabit Ethernet networks. These transceivers support a data transfer rate of 1000 Mbps and are compliant with the IEEE 802.3z standard.

The FTLF8519P2BCL transceivers feature an 850nm Single Mode Fiber (SMF) design, which is optimized for use in short-haul, multi-mode fiber applications. The 1000Base-SX (Short Wavelength) protocol offers a maximum transmission distance of up to 550 meters over OM1 and OM2 fiber cables, and up to 300 meters over OM3 and OM4 fiber cables. This makes these transceivers a popular choice for applications in data centers, telecom networks, and enterprise environments.

These transceivers are hot-pluggable, which means they can be installed and removed from the network without the need to power down the system. The SFP (Small Form-factor Pluggable) form factor provides a compact and rugged design, making these transceivers ideal for applications where space is limited.

Each transceiver comes with a single mode, LC connector and an integrated DDM (Dual Data Rate Monitoring) interface for link monitoring and remote power management. The module's digital diagnostic capabilities also allow for remote management of link faults and other system issues.

Overall, the Finisar FTLF8519P2BCL 1000Base-SX 850nm SFP GBIC Transceivers offer high performance, reliability, and versatility, making them an excellent choice for a wide range of fiber optic networking applications. With their small form factor, hot-pluggable design, and advanced features, these transceivers can help you build a high-performance, cost-effective network infrastructure.

Buying Finisar FTLF8519P2BCL 1000BASE-SX 850nm SFP GBIC Transceivers: A Thorough Analysis

The Finisar FTLF8519P2BCL 1000BASE-SX 850nm SFP GBIC Transceivers are fiber optic modules designed for use in Gigabit Ethernet networks. In this analysis, we will discuss the key features and benefits of these transceivers, followed by potential drawbacks, and conclude with a recommendation.

Features and Benefits:

1. Industry-standard SFP form factor: These transceivers conform to the Small Form-Factor Pluggable (SFP) standard and can be used in a wide range of networking equipment that supports 1000BASE-SX connection.

2. 850nm wavelength: The 850nm wavelength light emitted by these transceivers enables them to be used in multimode fiber (MMF) cabling, which is more cost-effective and easier to install than single-mode fiber (SMF) in certain applications.

3. Larger dispersion tolerance: Due to using multimode fiber, the Finisar FTLF8519P2BCL SFP GBIC Transceivers have a larger dispersion tolerance, resulting in greater distance capability than their single-mode counterparts, making them suitable for longer runs.

4. Ease of installation: MMF cabling is more flexible and less prone to fiber damage, making installation simpler.

5. Energy efficient: The Finisar FTLF8519P2BCL transceivers consume low power levels, contributing to energy savings.

Potential Drawbacks:

1. Limited reach: Compared to single-mode fiber, multimode fiber has a shorter maximum reach, which can limit the distance capability of these transceivers.

2. Lower data transmission rates: 1000BASE-SX supports a maximum data transmission rate of 1Gbps, which may not suffice for networks requiring higher speeds.

3. Attenuation: Multimode fiber is more susceptible to signal attenuation than single-mode fiber due to fiber core s larger size.

Conclusion:

The Finisar FTLF8519P2BCL 1000BASE-SX 850nm SFP GBIC Transceivers offer several advantages such as ease of installation, energy efficiency, smaller form factor, and cost-effectiveness suited for shorter-range applications. However, these transceivers may have limited reach, lower data transmission rates compared to other solutions and can experience more signal attenuation. Carefully consider the specific requirements of your network environment before deciding whether these transceivers are the best fit for your needs.

Recommendation:

For short to medium distance applications requiring Gigabit Ethernet connectivity, especially in environments where cost savings and ease of installation are critical factors, the Finisar FTLF8519P2BCL 1000BASE-SX 850nm SFP GBIC Transceivers are an excellent choice. In scenarios demanding higher transmission rates or extended distances, single-mode fiber solutions might be a more suitable alternative.

Details:

6 - MB. Ask before you bid/buy. All shipping, packaging materials and boxes must be saved.

part #: ftlf8519p2bcl prices

  • $36.00-$300.00

specifications switchchunk:

  • brand: Finisar
  • mpn: Ftlf8519p2bcl
  • type: Sfp

payments switchchunk:

  • other
  • wallet: Google-pay
  • credit card: Discover

returns switchchunk:

  • paid by: Seller
  • method: Money back
  • policy: Returns Accepted
  • time: 30 Days

shipping switchchunk:

  • class: Standard
  • transit: 6-9 Days
  • carrier: USPS, FedEx, UPS
  • type: Calculated
  • service: USPS Ground Advantage, FedEx Ground or FedEx Home Delivery, UPS Ground
  • cost: $0.00

seller switchchunk:

  • city: Chicago, Illinois
  • # reviews: 40885
  • rating: 98.7%

general switchchunk:

  • condition: Used
  • Enterprise Networking, Servers > Switches Hubs > Switch Modules

offer switchchunk:

  • options: Ship-to-home
  • quantity: 1
  • started: November 6, 2024
  • sold: 0
  • availability: In Stock
type: sfp,
category: computers > enterprise networking, servers > switches hubs > switch modules, sku: 2430557580712563,

Finisar FTLF8519P2BCL Is Similar To:

switchchunk logo
5 offers $36.00–$300.00 USD
  • Offer #1: $36.00 price + $0.00 shipping estimate = $36.00* total. You are looking at a Lot of 10 Finisar 1000BASE-SX 500M 850nm Part Number:.FREE SHIPPING
  • Offer #2: $37.84 price + $0.00 shipping estimate = $37.84* total. Finisar 1000Base-SX SFP Transceiver (Lot of 7).FREE SHIPPING
  • Offer #3: $300.00 price + $0.00 shipping estimate = $300.00* total. This Unit is sold as it is shown on the pictures Model:.FREE SHIPPING
  • Offer #4: $25.00 price + $10.65 shipping estimate = $35.65* total. FINISAR Qty of 1 per Lot Small Form Factor Pluggable (SFP) transceivers.+$10.65 shipping
  • Offer #5: $20.94 price + $24.19 shipping estimate = $45.13* total.+$24.19 shipping

Copyright © switchchunk.com