
( Brand: Cisco ), ( Manufacturer Part Number: CAT-29825 ), ( Part Type: Transceiver ), ( California Prop 65 Warning: This Product Contains A Chemical Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. ), ( Model Number: Sfp-10/25g-csr-s ), ( UPC: 011110122285 )
The Cisco Cat-29825 SFP-10/25G-CSR-S 300mMMF SFP28 Transceiver is a high-performance, small form-factor pluggable (SFP) module designed for use with Cisco Catalyst 29800 Series Switches. This transceiver provides 10G and 25G SFP28 connectivity with a 300m Multi-Mode Fiber (MMF) cable, making it an excellent choice for data center, enterprise, and service provider applications.
The transceiver supports both 10GBASE-SR and 25GBASE-SR applications, delivering data rates up to 10 Gbps and 25 Gbps, respectively. It utilizes a wavelength of 850nm for 300m MMF, providing a reach of up to 300 meters, making it suitable for short-range applications.
The Cisco Cat-29825 SFP-10/25G-CSR-S 300mMMF SFP28 Transceiver is designed with a rugged, compact form factor, measuring only 1.75 inches (44.5mm) in length. It is engineered to meet the highest industry standards, ensuring reliable and consistent performance over time.
This transceiver features a robust digital diagnostic interface (DDI), which enables remote monitoring and troubleshooting of the module, providing valuable information on link status, signal quality, and temperature. Additionally, it is backed by a limited lifetime warranty from Cisco, ensuring peace of mind for network operators.
With its high-speed data transfer capabilities, support for both 10G and 25G applications, and long reach with 300m MMF, the Cisco Cat-29825 SFP-10/25G-CSR-S 300mMMF SFP28 Transceiver is an essential component for any network infrastructure seeking to support high-bandwidth applications and data center connectivity.
The Cisco CAT-29825 SFP-10/25G-CSR-S 300mMMF SFP28 Transceiver is a high-speed optical transceiver designed for use with Cisco Catalyst 29800 series switches. Here are some pros and cons that might help you make an informed decision about purchasing this transceiver:
Pros:1. High-speed: This transceiver supports 10G and 25G speeds, making it an ideal choice for data center applications where high-bandwidth connectivity is required.
2. Compatibility: It is specifically designed for use with Cisco Catalyst 29800 series switches, ensuring seamless integration and reliable performance.
3. Long Reach: The 300mMMF (multi-mode fiber) design allows for longer reach compared to traditional single-mode fibers, making it a good option for applications where cabling distances are longer.
4. Energy Efficient: The transceiver is designed to be energy efficient, which can help reduce power consumption and save on operational costs.
5. Reliability: Cisco is a well-known brand in the networking industry, and this transceiver is no exception. It is built to high standards and is known for its reliability and durability.
Cons:1. Cost: This transceiver is more expensive compared to other transceivers due to its high-speed capabilities and long reach design.
2. Complexity: Installing and configuring this transceiver may require some level of expertise, especially if you are not familiar with optical networking technologies.
3. Limited Compatibility: While this transceiver is designed for use with Cisco Catalyst 29800 series switches, it may not be compatible with other types of switches or routers.
In conclusion, the Cisco CAT-29825 SFP-10/25G-CSR-S 300mMMF SFP28 Transceiver is a high-performance, reliable, and energy-efficient option for applications that require high-speed connectivity and longer cabling distances. However, it comes with a higher cost and may require some level of expertise to install and configure.
If you are in a data center environment where high-speed connectivity and longer cabling distances are critical, then this transceiver is a worthwhile investment. However, if you have shorter cabling distances or are working with a limited budget, then you may want to consider other options. Ultimately, the decision to purchase this transceiver depends on your specific networking requirements and budget constraints.
That's why byte offers a 30-Day Money Back Guarantee. Up for sale is a Cisco SFP-10/25G-CSR-S 300Mmm F SFP28 Transceiver. All technicians carry OEM specific certifications. All parts are guaranteed to be genuine OEM and free of any white label, or third-party.
Boxes or APO/FPO. All parts ship in anti-static or ESD packaging to ensure safe transit. Over 40,000 square feet of air conditioned space in two facilities.