AI 37016 Qsfp Mtp Mpo Dom QSFP-PLR4-40G 40GBASE-PLR4 1310NM 10KM Mtp/mpo

( Brand: Ai ), ( Manufacturer Part Number: 37016 )

Review AI Fs 40gbase-plr4 Qsfp 1310nm Mtp/mpo Dom

TheFS datacenter-ready QSFP-PLR4-40G transceiver is a high-performance solution designed for 40GBASE-PLR4 applications. This transceiver employs a 1310nm wavelength Dual Polarization Quad Mode Fiber (DP-QMF) for 10km transmission over Multimode Fiber (MMF) using an MPO/MTP connector interface.

The QSFP-PLR4-40G transceiver complies with the IEEE 802.3ba standard and transmits data at aRate of 40Gbps in full duplex mode. Its Plastic Optical Cable (POC) design ensures better reliability and higher tolerance to temperature, humidity, and vibrations in comparison to traditional single-mode fiber solutions.

This transceiver is equipped with a small Form-factor Pluggable (SFP ) rate of 6.25Gbps, allowing for easy hot-plug capabilities and backward compatibility with many 6.25Gbps SFP deployments. In addition, its low power consumption of 10W and support of power over cable (PoC) further contribute to energy-efficient data center operation.

The QSFP-PLR4-40G transceiver's advanced features are comprised of Automatic Disable (Auto-ND), LASer Disable (LAS-OFF) and Fault Tolerant Link (FTL) Poling, aimed at enhancing system reliability and fault tolerance in high-density networking environments.

In connecting and maintaining your network infrastructure, this transceiver delivers high performance, flexibility, and cost-effectiveness without compromising on essential features. It's an ideal choice for enhanced data center connectivity and network expansion, especially in shorter reach or multimode fiber infrastructures.

The QSFP-1310nm 40GBASE-PLR4 transceiver, with model number FS.COM ES37016, is a fiber optic transceiver used for 40G Ethernet connections. Here, we will discuss the pros and cons of purchasing this specific transceiver.

1. Long Reach: The 1310nm wavelength support allows the ES37016 to achieve a transmission distance of up to 10km through multimode fiber. This makes it an ideal solution for data centers and enterprises that require long-distance connectivity within their premises.

2. High Bandwidth: With a data transmission rate of 40Gbps, the FS.COM ES37016 provides sufficient bandwidth for high-density data center applications and large-scale enterprises.

3. Compatibility: This transceiver is compatible with standard QSFP cages (Type II or III) and can be used with a range of networking systems that utilize the QSFP form factor.

4. Efficient Power Consumption: QSFP transceivers, including ES37016, are known for their power-efficient designs. This can lead to energy savings and reduced operational costs for organizations using this technology.

5. MPO/MTP & LC Interfaces: This transceiver comes with both Multiplexed Push-Pull (MPO) and Lucent Connector (LC) interfaces. This versatility builds in flexibility for various cabling configurations.

1. Potential Interoperability Issues: To ensure seamless communication between networking devices, it's essential to check compatibility with your specific networking hardware. Transceiver manufacturers like FS.COM generally list compatible equipment on their websites, but it's still recommended to check with the networking vendors directly.

2. Cost: Compared to lower capacity fiber transceivers like 1G or 10G, the cost per bit for 40GBASE-PLR4 transceivers is significantly higher. However, for high-density applications and larger enterprises, the investment may be justified due to the increased bandwidth and reach capabilities.

3. Requires Special Handling: Careful handling of MPO and LC connectors is essential during installation and removal. Fibers in MPO and LC connectors are delicate and can be damaged by rough handling or improper equipment, potentially leading to connection failures.

4. Supports Only Multimode Fiber: This transceiver supports only multimode fiber, which may not be suitable for long-haul applications that require singlemode fiber.

In conclusion, the FS.COM ES37016 QSFP 40GBASE-PLR4 transceiver offers various advantages, such as long reach, high bandwidth, compatibility, and power efficiency. However, its potential interoperability issues, cost, need for special handling, and limitation to multimode fiber are important considerations to keep in mind. Ultimately, organizations should weigh these pros and cons against their specific networking requirements and budget to determine whether this transceiver is the right fit for their infrastructure.

Recommendation: The FS.COM ES37016 QSFP 40GBASE-PLR4 transceiver is recommended for data centers and enterprises seeking high-bandwidth, long-distance 40G Ethernet connections using multimode fiber. It is essential to ensure compatibility with the networking equipment prior to implementation and to handle the transceiver cautiously during installation or removal.

Details:

Box Delivery. There is some minor scuffing to the body. Condition: This unit is working and in good cosmetic condition. Inventory ID: F21-1044.

FS QSFP-PLR4-40G. Please review the pictures thoroughly, ready to ship. Depending on the weight and dimensions, USPS service might be available to used for some countries.: AI 40GBASE-PLR4 QSFP 1310nm 10KM MTP/MPO DOM.

Warranty: 30 Day.

part #: 37016 prices

• $99.00-$797.99

specifications switchchunk:

• brand: Ai
• mpn: 37016

offer switchchunk:

• started: December 11, 2024
• options: Ship-to-home
• avAilability: In Stock
• best offers: True
• sold: 0

payments switchchunk:

• wallet: Google-pay
• other
• credit card: Visa

general switchchunk:

• condition: Used
• Enterprise Networking, Servers > Switches Hubs > Switch Modules

shipping switchchunk:

• carrier: USPS, UPS
• service: USPS First Class Large Envelope, UPS Ground Saver
• cost: $2.04
• class: Standard, Economy
• type: Calculated
• transit: 3-9 Days

seller switchchunk:

• # reviews: 4895
• rating: 99.7%
• city: Rocklin, California

returns switchchunk:

• policy: No Returns

Ai 37016 Is Similar To:

• Fs Qsfp28-lr4-100g Optical Transceiver 100g Qsfp Lr4 Lc 1310nm 10km New Ai (53.1% similar) The qsfp 28 module provides 100GBASE-LR4 throughput up to 10KM over a standard pair of single mode fiber SF with duplex LC connectors. With these features, this easy to install, hot stoppable transceiver is suitable be used in various applications, such as 100G talcum connections, data center...(January 17th, 2025)